□
Skip to content
Bossweld X-Cut 15.0 Plasma Cutter with PT40 torch and earth clamp for metal cutting.

Bossweld X-Cut 15.0 Plasma Cutter 240V 15A

by BossWeld
$1,158.90

Notify me when back in stock

15 Amp

15mm Clean Cut

Mild Steel, Brass,
Copper, Stainless Steel,
Aluminium

8kVA

Bossweld X-Series X-Cut 15.0 Plasma Cutter

Experience precision, power, and portability with the Bossweld X-Series X-Cut 15.0 Plasma Cutter. Here's what makes it exceptional:

  • Advanced Engineering:

    • IGBT Inverter Technology
    • Reliable Pilot Arc Start (HF Start)

  • Robust & Portable Design:

    • Fan-cooled and lightweight at 6.5kg
    • Compact dimensions: 46x28x14.5cm

  • Professional-Grade Performance:

    • Backed by a 3-year warranty (subject to terms and conditions)
    • Operates flawlessly up to 1000m in altitude
    • Suitable for temperatures from -10°C to +40°C
    • Handles humidity up to 90% (at 20°C)

  • Safe Operation Guidelines:

    • Maintain a minimum 30cm clearance from walls on a stable horizontal surface (do not exceed a 15° tilt)
    • Avoid using in rain, damp, or wet conditions

Technical Specifications

Power & Electrical:

  • Input: Single Phase, 240V, 50-60Hz ±15%
  • Output Current: Adjustable 20-40 Amps via knob
  • Duty Cycle:
    • 20% @ 40A (2 min ON / 8 min OFF per 10 min cycle)
    • 100% @ 25A
  • Voltage Details:
    • 40A @ 96.0V (20% duty cycle)
    • 25A @ 92.0V (100% duty cycle)
  • Open Circuit Voltage: 32V (pilot arc)
  • Input Currents: Max: 32A, Effective: 14.3A
  • Generator Requirement: Minimum 8kVA
  • Protection: IP21, Insulation Class H, Thermal Overload Protection (auto-shutdown with indicator)

Cutting Capabilities & Air Requirements:

  • Cutting Thickness:
    • Clean Cut on Mild Steel: Up to 15mm
    • Severance Cut on Mild Steel: Up to 18mm
  • Materials:
    • Compatible with Mild Steel, Stainless Steel, Aluminium, Brass, Copper
    • Note: Alloy cutting requires 50% more amperage than steel for the same thickness
  • Air Supply:
    • Pressure: 60-80 PSI (410-550 kPa / 0.41-0.55 MPa)
    • Airflow: 7-8 CFM (200 LPM)
    • Quality: Clean, dry, oil-free (use M26 filter and coalescing filter)

Key Features:

  • Output Power: Up to 40 Amps
  • Plug: Fitted 15A plug (avoid grinding to preserve warranty)
  • Torch System:
    • 4m PT40 Plasma Cutting Torch with central connector
    • Safety trigger with anti-accidental activation
  • Air System: Built-in air regulator, pressure gauge, and Air Check Switch
  • Additional: Lightweight design, IP21 protection, thermal overload auto-cooling

Comprehensive Package Inclusions

  • Bossweld X-Series X-Cut 15.0 Inverter Plasma Cutter
  • 4m Bossweld PT40 Plasma Torch
  • 3m 200A Earth Clamp
  • Built-in Air Regulator
  • Carry Strap
  • Torch Spares Kit (consumables)
  • Operator Manual

Upgrade Options & Accessories

Enhance your plasma cutting system with:

  • Universal Welders Trolley (P/N: 600311)
  • M26 Plasma Air Filter (P/N: 94.M26)
  • M26 Filter Replacement Element (P/N: 94.M723)
  • PT40 Wear Parts Kit (P/N: 94.PT40FEK)
  • Circle Cutting Guide (P/N: 96.TJ1202H)
  • Roller Guide (P/N: 96.TJ1536)
  • Safety Gear:
    • Welding Gloves (P/N: 700010)
    • Flame-Retardant Jackets (P/N: 700255 series)
    • Welding Goggles (P/N: 700055)
  • Additional Product Range: MIG Wire, TIG Rods, Electrodes, Gas Equipment, Welding Helmets, etc.

Safety Guidelines & Best Practices

Personal Protection & Work Area:

  • Wear appropriate PPE: welding helmet/goggles (shade 5+), fire-resistant clothing, gloves, and respirators in confined spaces.
  • Operate in a well-ventilated, fire-safe zone with flammable materials removed and bystanders kept at least 15m away.
  • Always have a fire extinguisher and welding blanket on standby.

Electrical & Operational Safety:

  • Use a 30mA RCD and avoid extension cords unless heavy-duty with proper earth connections.
  • Prohibited: Cutting containers or pipes that held flammable liquids/gases, and cutting painted, varnished, or coated surfaces due to toxic fume risks.
  • Post-operation: Switch off and disconnect power, and allow workpiece to cool (use pliers or tongs).

Setup & Operation:

  1. Connections:
    • Attach the air compressor hose to the rear panel inlet.
    • Plug into a 240V outlet (ensure the mains switch is OFF).
    • Connect the earth clamp to the positive terminal and the workpiece (clean, bare metal).
  2. Air Pressure Adjustment:
    • Set the built-in regulator to 60-80 PSI and test with the Air Check Switch.
  3. Cutting Process:
    • Adjust current via the knob based on material thickness.
    • Tilt the torch at 60° for piercing to prevent molten metal splashback.
    • Initiate the arc at the material edge or drill a small starter hole, maintaining a steady speed for optimal cuts.

Maintenance & Troubleshooting:

  • Regularly inspect torch consumables (nozzle, electrode) and clean the unit with a dry cloth.
  • Store in a dry, child-proof area and dispose of packaging via local recycling programs.
  • Common Issues:
    • No Power: Verify mains connection, fuse, and switch.
    • No Arc: Check torch/earth connections and consumable wear.
    • Thermal Overload: Allow a 20-minute cooldown; do not exceed the duty cycle.
    • Unstable Current: Check voltage stability and cable tightness.
    • Torch Ignition Failure: Ensure gas pressure (60-80 PSI) is maintained or replace faulty parts.

Warranty, Support & Shipping

  • Warranty: 3 Years (excludes consumables, misuse, unauthorized repairs; exceeding the duty cycle voids coverage

Why Bossweld?

Bossweld stands as a trusted leader in plasma cutting technology, offering innovation, reliability, and outstanding customer support. Whether you are cutting Mild Steel, Stainless Steel, Aluminium, Brass, or Copper, the X-Cut 15.0 Plasma Cutter is engineered to deliver precision, efficiency, and long-term value. Elevate your operations with a tool that combines advanced technology, meticulous engineering, and a comprehensive support system.